control volume

英 [kənˈtrəʊl ˈvɒljuːm] 美 [kənˈtroʊl ˈvɑːljuːm]

控制体积

计算机化学



双语例句

  1. There is no remote control, because you pause, play, control volume and switch apps and media using the connected devices themselves.
    Chromecast没有遥控器,因为你是使用连接的设备来进行暂停、播放、控制音量和切换应用与媒体的操作的。
  2. You could also swipe the fabric to control volume.
    你还可以在布料上滑动手指来控制音量。
  3. Governing equations of the model are discretized by control volume method, and non-staggered grids and SIMPLE algorithm are introduced to simplify the program during the discretization.
    采用控制体积法与SIMPLE算法对一般曲线坐标下控制方程进行离散和求解,建立了长江土脑子河段曲线二维动床模型。
  4. Time dependent ordinary differential equations are obtained from the mass and energy balances for each control volume.
    针对每个控制容积建立了质量和能量平衡的微分方程。
  5. A Control Volume Based Finite Element Method for Analysing Fluid Flow and Heat Transfer of Injection Molding Process
    应用控制容积有限元法分析注射充模过程中塑料熔体的流动与传热
  6. These settings control volume and advanced options for the voice playback or recording device you selected.
    这些设置控制声音播放或您选择的录音设备的音量和高级选项。
  7. On the basis of the control volume method, the discrete ordinate method ( DOM) was used to solve the radiation heat transfer equation of the model.
    设计了一种隐式迭代方法求解颗粒能量方程,采用离散坐标方法计算炉膛内的辐射传热,完整地考虑颗粒能量方程中的辐射项。
  8. Numerical Simulation of Air Spring Shock Based on Control Volume Method and Equivalent Viscous Damping Method
    基于控制体积法及等效粘性阻尼法的空气弹簧冲击数值仿真
  9. A stage by stage mathematical model of the compressor in a turbojet engine is developed based on the control volume theory.
    根据控制体理论,建立了涡喷发动机中压气机的逐级数学模型。
  10. In this work, a numerical control volume method was applied to study the heat transfer and energy consumption of a belt calendar.
    介绍了应用数值控制体积模型法对带式压光过程热量传递与能耗分析所得到的结果。
  11. According to the discrete material balance equation of control volume, a new numerical scheme based on PEBI grid and CVFE grid is provided, where absolute permeability is in tensor form.
    根据所建立的单个控制体离散形式的物质平衡方程,基于PEBI和CVFE网格,采用任意形式的渗透率张量,建立了相应的数值算法。
  12. A simplified control volume nodalization of bun-dle, may lead to late coming of predicted peak fuel temperature compared to that of measured;
    棒束栅元单一控制体划分,会使得计算得到的燃料峰值温度等表征严重事故来临时间晚于试验值;
  13. It is convenient to adopt the control volume illustrated in Fig. 2-1.
    采用如图2―1所示的控制容积是很方便的。
  14. Spool configuration control volume record
    假脱机结构控制卷记录
  15. The expansion work resulted from variation of control volume was taken into account by reserving the variable volume term in energy equation.
    通过保留能量方程中的变体积项考虑了由于控制体体积的改变所输出的膨胀功。
  16. In this paper, the Control Volume Finite Element Method ( CVFEM) was applied to simulate RTM mold filling.
    采用控制体积法研究了以四步法编织矩形组合截面三维编织物的特殊细观结构。
  17. The discrete equation was deduced by control volume integral method, and realized by numerical method.
    用控制容积积分法导出了离散方程,并用数值方法进行了求解。
  18. In this paper, a moving control volume concept is utilized to deduce the formulas for calculating dynamic flow forces of a poppet valve, and the frequency response of flow forces is studied on both theory and experiment.
    应用运动控制体的概念,推导得出了锥阀动态液动力的计算式,并从理论和实验两个方面研究了液动力的频率响应。
  19. This paper has developed the concept of control volume, established a physical model of moving control volume and also derived the fundamental equations of moving control volume and indicated the relations to the moving control volume to the ordinary control volume and the system.
    发展了控制体的概念建立了运动控制体的物理模型,导出了运动控制体的基本方程。指出了运动控制体与普通控制体以及系统的关系。
  20. Comparison of the finite element/ control volume method with flow analysis network technology in Mould-Filling simulation of RTM process
    RTM工艺注模过程模拟的有限元/控制体积方法和流动分析网络技术比较
  21. Furthermore, the pressure correction equation is deducted for the finite control volume in this paper.
    推导了压力修正方程在有限控制体上的离散方程。
  22. A three-dimensional model on a single channel in proton exchange membrane fuel cell is created, based on the theory of fluid dynamics and heat transfer, and is solved by means of the control volume methods.
    根据流体动力学和传热学理论,建立了一个三维的单流道质子交换膜燃料电池模型,并应用有限控制体法对模型进行求解。
  23. The methods of determining the main model parameters was introduced, the numerical model was solved by means of the control volume method, and the calculation results were analyzed.
    介绍了主要模型参数的确定方法,采用控制容积方法对数值模型进行了求解,并在模型实验的基础上,对计算结果进行了分析。
  24. The model established mass and energy equilibrium equations for each macro big control volume.
    在大空间多区热质平衡模型研究基础上,建立了各宏观大控制体内的热质平衡方程。
  25. The finite difference equations was deduced using three dimensional control volume method.
    用三维控制容积法推导了传热、导电的有限差分方程。
  26. The control equations are dispersed with the control volume method, and staggered grids and SIMPLE method are employed in the simulation to calculate the velocity and temperature fields in high and large factory buildings.
    利用控制容积法对控制方程进行离散,同时采用交错网格和SIMPLE法,建立了计算高大厂房速度场和温度场的数值模拟软件。
  27. In radio and walkman, it can control volume. Switch-potentiometer also can be used as switch.
    在收音机,随身听中常用来控制音量的大小,开关电位器兼做开关之用。
  28. In this paper, designs, focusing on the work carried out are: research and analysis of the de-icing fluid heating, the control system of each control volume, de-icing system test platform designed to draw the schematic, design control logic.
    本文在设计当中,着重进行的工作有:研究和分析了除冰液加热、控制系统各个控制量,设计画出除冰系统试验平台原理图,设计控制逻辑。
  29. The results are slightly affected by the size of the control volume.
    控制体大小对计算结果有一定影响。
  30. Melt flow front and gas penetration front are determined by control volume method.
    采用控制体积法更新熔体流动前沿和气体穿透前沿。